2024-07-25
DIN17175 is the federal German industrial standard. It is mainly used for heating surface pipes, economizers, superheaters, reheaters, and petrochemical boilers
2024-07-25
GB/T 9711 PSL2 refers to transportation steel pipes for the oil and gas industry that are manufactured in accordance with Chinese national standard GB/T 9711 an
2024-07-02
ASTM A537 is a high-strength steel plate for pressure vessels, and its execution standard is usually ASTM A537/A537M. This kind of steel plate is mainly used to
2024-07-02
The content and proportion of these elements will directly affect the properties of the steel plate, such as mechanical properties, wear resistance, corrosion r
2024-06-21
ASME SA633 steel plate is a type of standard high-strength low-alloy structural steel, which is particularly suitable for welding, riveting, or bolted connectio
2024-06-14
TStE380 is a high-strength fine-grained structural steel. Its chemical composition mainly includes carbon (C), silicon (Si), manganese (Mn), phosphorus (P), sul
2024-06-06
P235GH is a European standard container plate, mainly used to manufacture various pressure vessels, such as storage tanks, reactors, heat exchangers, etc. This
2019-08-26
Differences Between Mold Steel Cr12and Cr12MoV include Cr12 mold steelis a typical alloy tool steel, with good hardenability and good wear resistance, but poor impact toughness. Cr12MoV cold work mold steel is featuured by goodhardenability, quenching an
2019-08-26
T10/T10A carbon tool steel belongs to hypereutectoid steel, and it can maintain fine grains without heating when it is heated at 700-800 degrees Celsius. After quenching, there is unmelted excess carbide in the steel, which increases the wear resistance o
2019-08-23
In many fields such as automobile molding, aerospace, rail transit, instrumentation, medical equipment, household appliances, new energy, etc., 60% to 80% of the parts are molded by mold. Therefore, the quality level of the mold is a important measure of
2019-08-14
M2 alloy steel is a molybdenum-based high-speed steel, which has the advantages of small carbide unevenness and high toughness. M2 high-speed steel is easy to overheat, so the quenching heating temperature should be strictly controlled, and the heat treat
2019-08-14
1.2344 mold steel is remelted by electroslag, uniform in material, good hardenability, good machinability and polishing performance, high toughness and plasticity, good high and low temperature wear resistance and high temperature fatigue and heat resista